We offer a comprehensive JONHON‘s range of outdoor wireless base stations connectors / antennas, including fiber connectors, power supply, Radio Frequency connectors, board-to-board high speed, all types of Telecom connectors.
Optical module for wireless
Range of board to board PCB connectors for data transmission connections.
DP13 connectors
High power board to board connectors for signal transmission.
- Pitch : 6.7 ~7.3 mm
- Vibration frequency: 10Hz~ 55Hz, vibration amplitude: 0.35 mm peak
-
Impact : acceleration 500 m/s2 (50G), in 11 ms
-
Endurance : ≥50 cycles
-
Working voltage : 80V DC
- Working current : 1A (signal); 40A/Pin or 70A/Pin optional (power)
-
Withstand voltage : 500V AC (signal); 1000V AC (power)
- Working T° : -55℃ ~ 125℃
- Connector integrated in dust caps to protect from dust pollution
- Convenient assembly on PCB board.
DP4 connectors
Power transmission between PCB, high conduction copper connectors.
| Rated voltage | 12V |
|---|---|
| Contact resistance | ≤5mΩ |
| Shock and vibration RESISTANCE | 10Hz~500Hz, accelerated speed 98m/s2 |
| Working t° | -55℃～125℃ |
| Endurance | 200 cycles |
| Rated current (Signal contact) | 1A |
| Rated current | 22A / 42A |
| Certifications | RoHS compliant, TUV, UL/CUL certificated |
DP2 connectors
Wireless base station connectors.
| Pitch | Power : 6.35mm, 7.62mm / Signal 2.54mm |
|---|---|
| Configuration | 2-level power contacts & 2-level signal contacts, AC or DC |
| Rated voltage | Power : 250V / Signal : 48V |
| Contact resistance | Power : ≤0.003Ω / Signal ≤0.02Ω |
| Withstand voltage | Power ≥2500V / Signal ≥1000V |
| Working t° | -55℃～125℃ |
| Endurance | 200 cycles |
| Rated current | Power : 30~50A / Signal 2.5A |
| Insulation | Between power contacts ≥10000MΩ / Between signal contacts ≥500MΩ |
| Certifications | RoHS compliant, TUV, UL/CUL certificated |
Microcell optical connectors
Optical or Hybrid (Optical + Electrical) connectors for wireless bases stations.
Micro-base station optical connectors
On-site assembly used in 5G base stations, FTTX, optical fiber distribution frames, machine room or optical fiber network.
| Insertion loss | ≤ 0.5dB in single mode |
|---|---|
| Return loss | ≥ 45dB in single mode |
| CAble retention | ≥ 35N (adapted for 1.6*2.1 mm butterfly cable) |
| Working t° | -40℃～80℃ |
| Endurance | 500 cycles |
| Standard | YD/T 2341.1,YD/T 1272.1 compliant |
ESC hybrid connectors
Optical + Electrical interface, one-step signal + power connection. Used in micro-base stations, security monitoring and telecom networks, power transmission through the network port.
| Structure | push-pull locking |
|---|---|
| CABLE COMPATIBILITY | 2*3, 1.8*4.2, 2.2*5.3 |
| Rated current | 3A |
| Contact resistance | ≤ 20MΩ |
| Withstand voltage | ≤ 500 VAC |
| Insulation resistance | 100MΩ | Working t° | -40℃～80℃ | Vibration | frequency 10Hz-50Hz, amplitude 1.5 mm, sweep frequency 45Hz/min, 2H |
| Endurance | 500 cycles |
| salt spray testing | 48h |
| COMPLIANCE | RoHS |
LC SC optical fiber patch cord
Data center rooms connection or telecom station connections.
| Structure | 2 core or multiple core fibers |
|---|---|
| FIBERS | Single-mode or multi-mode, PC/APC: G652D, G657A2, OM3, OM4 etc.. |
| Insertion loss | Single-mode (PC)≤0.3dB, Single-mode (APC)≤0.3dB, Multi-mode (PC)≤0.2dB |
| ReturN loss | Single-mode (PC)≥50dB, Single-mode (APC)≥60dB, Multi-mode (PC)≥35dB |
| Connectors | LC/DLC |
| Working t° | -10℃～60℃ |
| Vibration | frequency 10Hz-50Hz, amplitude 1.5 mm, sweep frequency 45Hz/min, 2H |
| Endurance | 500 cycles |
RJ45 connectors with pull tab
IEC 60603-7 standard compliance.
| Structure | Unlock with a pull tab |
|---|---|
| Compatible cables | 1.5 mm², 2.5 mm² and 4 mm² wires |
| Vibration | 10Hz ~ 500 ~ 10Hz, acceleration 10 m/s2 |
| Working voltage | 85V DC |
| Working current | 6A |
| Withstand voltage | 500 VAC |
| Working t°-40°C~125°C | |
| Endurance | 200 cycles |
RRU/AAU Unit connectors
Remote Radio Units and Active Antenna Units 4G/5G conncectivity solutions.
Outdoor waterproof power connectors
Poka-yoke connection, suitable for various cables solutions.
| RAted current | 32/40/63/125 A |
|---|---|
| Contact resistance | ≤ 2mΩ |
| Rated voltage | 85 / 300 V DC – 300 / 450 V AC |
| Withstand voltage | 1500 V AC |
| Lightning strike | 20 KA |
| Temperature rise | ≤ 30℃ |
| Insertion force | ≤ 80N |
| Endurance | 50 cycles |
| Locking force | higher than 200 N |
MPO MTP optical fiber distribution box
Plug and play module, standard 19 inch rack mount module.
| Casing material | CRS steel with painting |
|---|---|
| DImensions | 109x34x133 mm |
| port types | DLC, MPO and others |
| Number of adapters | ≤12 (DLC), ≤6 (MPO) |
| Temperature range | -10°C ~60°C |
MPO-LC patch cord
MPO-LC Branch optical fiber patch cord.
| Application | data centers |
|---|---|
| structure | multi-core bundle cable with MPO/MTP and LC/SC connectors |
| USAGE | Used to interconnect MPO interfaces with single-core interfaces by dividing the terminating 12-core connector of the backbone cable into single-core or dual-core connectors. |
MPO-MTP patch cord
MPO-MTP backbone optical fiber patch cord. Can be custom designed.
| Application | data centers server room, LAN cabling backbone systems |
|---|---|
| structure | multi-core bundle cable with MPO/MTP |
| Core number of connectors | 12 / 16 / 24 and more | Fiber types | Single mode / multimode, APC/PC, G652D/G657A2/OM3/OM4 |
| Insertion loss | low loss≤0.35dB, standard≤0.7dB |
| Return loss | Single-mode (APC) ≥ 55dB, Multi-mode (PC) ≥ 25dB, Multi-mode (APC) ≥ 40dB |
| Durability | ≥500 |
| Working temperature | -10°C~60°C |
HML12 high-speed circular connectors
High-speed communication robust connectors
| Application | communications |
|---|---|
| Compliance | IEC 61076-2-109 |
| Assembly | M12x1 thread |
| IP degree | IP67 connector |
| Casing | Die casting zinc alloy, offers EM shielding |
| Connectivity | 10 Gbit Ethernet signal |
| Durability | ≥100 cycles |
| Working temperature | -40°C~85°C |
| Rated current | 1A |
| Contact resistance | ≤15mΩ |
| Insulation resistance | ≥100MΩ |
| Rated voltage | 50V AC/60V DC |
AISG connectors
RoHS connectors for AISG smart antennas. IEC-60130-9 standard, excellent EMI shielding performance, IP67.
| Shock | 100Hz ~ 500Hz, 20m/s2 |
|---|---|
| Endurance | 500 cycles |
| Working temp | -40°C ~ 85°C |
| Relative humidity | 40°C, 90%~95% |
| Rated Voltage | nomal trmp 100V (DC or 50Hz AC effective value) |
| Rated Current | 5A |
| Contact resistance | ≤5mΩ |
| Insulation Resistance | nomal trmp ≥1000MΩ; humid and heat ≥20MΩ |
| Withstanding voltage | 1200V |
| Cable gauge | welding pin or socket: ≤0.5mm2 (20~26AWG); crimping pin or socket: 0.14~0.75mm2 (18~26AWG) |
CT50A connectors
Bayonet coupling IP67 connectors.
Over molding metal plugs, RoHS conformity.
Usage: tunable antenna interface, time service interface, UDA etc..
| Rated Current | 5A |
|---|---|
| Rated Voltage | 500V |
| Contact Resistance | ≤12.5mΩ |
| Withstanding Voltage | 1500V |
| Shock and vibration | 10Hz ~ 500Hz, accelerated speed 98m/s2 |
| Insulation Resistance | ≥5000MΩ |
| Endurance | 500 cycles |
| Working temp | -40°C ~ 80°C |
| IP degree | IP67 (after mating) |
SMP Connectors
Small board to board connectors, three interfaces options : full detent, limit detent, smooth bore.
| Characteristic impedance | 50Ω |
|---|---|
| Frequency range | DC～12.4GHz (recommended)
12.4～26.5GHz (recommended) 25.6～40GHz (operating range) |
| Insulation resistance | 1000MΩ |
| Dielectric voltage resistance | 500V (sea level) |
| Contact resistance | Center conductor: ≤6mΩ , outer conductor: ≤8mΩ (stainless steel housing) |
| VSWR | DC～12GHz, ≤1.15
12～26.5GHz, ≤1.35 26.5～40GHz, ≤1.6 |
| Inserting loss | ≤0.05√F(GHz)dB |
| Working temp | -55℃～125℃ |
| Endurance | Full detent, 100 cycles
Limit detent, 500 cycles Smooth bore, 1000 cycles |
4.3/10 connectors
According to IEC61169-54 standard. Low PIM, 3 options : push-pull, hand taut or screw. RoHS compliant, IP68 connector.
| Characteristic impedance | 50Ω |
|---|---|
| Frequency range | DC～12GHz |
| Insulation resistance | ≥5000MΩ |
| Dielectric voltage resistance | 2500V AC |
| Contact resistance | center conductor: ≤1mΩ , outer conductor: ≤1mΩ |
| VSWR | ≤1.15 |
| Inserting loss | ≤0.05√F(GHz)dB |
| Working temp | -55℃ ～ 90℃ |
| Endurance | 100 cycles |
| IP degree | IP68 (after mating) |
DIN RF connectors
Standards RF connectors for signal transmission between RRU and antenna, RRU and AAU.
Conform to IEC61169-4 standard, screw coupling, IP67 and RoHS compliant.
| Characteristic impedance | 50Ω |
|---|---|
| Frequency range | DC～7.5GHz |
| Insulation resistance | ≥5000MΩ |
| Dielectric voltage resistance | 4000V AC |
| Contact resistance | center conductor: ≤1MΩ , outer conductor: ≤1.5mΩ |
| VSWR | ≤1.15 |
| Insertion loss | ≤0.06√F(GHz)dB |
| Working temp | -65℃ ～ 165℃ |
| Endurance | 500 cycles |
| IP degree | IP67(after mating) |
N RF signal connectors
Standards RF connectors for signal transmission between RRU and antenna, RRU and AAU.
Conform to IEC61169-16 standard, screw coupling, IP67 and RoHS compliant.
| Characteristic impedance | 50Ω |
|---|---|
| Frequency range | DC～11GHz |
| Insulation resistance | ≥5000MΩ |
| Dielectric voltage resistance | 1500V AC |
| Contact resistance | center conductor: ≤1.5MΩ , outer conductor: ≤2mΩ |
| VSWR | ≤1.3 |
| Insertion loss | ≤0.06√F(GHz)dB |
| Working temp | -65℃ ～ 165℃ |
| Endurance | 500 cycles |
| IP degree | IP67(after mating) |
Outdoor DY4 power connectors
Standard outdoor power connectors for RRU / AAU / BBU power interface. Waterproof. Tri-groove bayonet type, high resistance to corrosion (720h salt spray test), match cables from 2.5mm² ro 10 mm².
Conform to IS021207 -B standard, screw coupling, IP65 and RoHS compliant, TUV, UL certification.
| Rated current | 26A, 55A, 70A |
|---|---|
| Rated voltage | 60V |
| Contact resistance | ≤1.5mΩ |
| Withstand voltage | 1500V 60s |
| Shock and vibration | 10-150-10Hz, 2h, accelerated speed 40m/s2 , IEC60068-2-6 |
| Insulation resistance | Normal temp≥1000MΩ ; humid and heat≥50MΩ |
| Endurance | 100 cycles |
| Temp Shock | -40℃ ~ 105℃ |
| Max rated working temp | 105℃ |
| Engaged separating moment of force | ≥100Ncm, ≤150Ncm |
| Corrosion | ISO21207– B, 35 days |
| IP degree | IP65 (after mating) |
DY2 Outdoor power connectors
Standard outdoor power connectors for RRU / AAU / BBU power interface. Waterproof. Quick locking and unlocking type, high resistance to corrosion, match cables from 2.5mm² ro 10 mm².
Conform to IS021207 -B standard, screw coupling, IP67 and RoHS compliant, TUV, CUL certification.
| Rated Current | φ3: 40A、φ2: 20A、22D#: 2A |
|---|---|
| Rated Voltage | 500V |
| Contact Resistance | 22D#≤12mΩ, φ3≤0.75mΩ, φ2≤1.25mΩ |
| Withstanding Voltage | normal condition ≥ 1200V, humid and heat ≥ 200V |
| Shock and Vibration | 10Hz ~ 500Hz, accelerated speed 196m/s2 |
| Insulation Resistance | normal temp≥5000MΩ, humid and heat≥50MΩ |
| Endurance | 500 cycles |
| Temp Shock (℃ ) | low temp: -55 ℃, high temp: 125 ℃ |
| Separating Force of Connector | ≤100N, ≥the sum of single-socket force |
| Salt Spray | 10 day alternating salt spray |
| IP degree | IP67 (after mating) |
PDLC03L Outdoor connectors
Standard outdoor power connectors for RRU / AAU / BBU power interface. Waterproof. Quick locking and unlocking type, high resistance to corrosion.
One side DLC plug and other side LC/FC or SC plug, UV resistant, RoHS compliant, UL1581 certification.
| Insertion loss | single mode≤0.3dB, multi mode≤0.3dB |
|---|---|
| Return loss | single mode≥45dB, multi mode≥35dB |
| Pull force | 180N |
| Endurance | 500 cycles |
| Working temp | -40～80℃ |
| IP degree | IP67 |
BBU/DU/CU connectors
Standard connectors for 4G/ 5G RAN (Radio Access Network).
GF4A connectors
Suitable for Huawei’s BBU 4G/5G base stations.
high-speed differential and power signal transmission between the laminated boards. Transmission rate up to 56 Gbps PAM4.
Reference : Q/21EJ13603
Support signal protocols IEEE802.3 and OIF-CEI
Dielectric withstand voltage: standard atmospheric pressure 500V AC
Insulation resistance: normal temp ≥ 1,000MΩ
Low level contact resistance: variation ≤10mΩ (after environment test)
Rated current: 1A/pin
Working temp: -65℃ ~ 105℃
Salt spray: 48 h
Temp endurance: 500 h at 105℃
Temp shock: -65℃ ~ 105℃, 5 cycles
Endurance: 250 cycles
Vibration: 10Hz~500Hz~10Hz, acceleration amplitude 147 m/s2
Impact: half-sine wave, peak acceleration 490 m/s2
CZ35 board-to-wire connectors
Wire screw locking, wave-soldering connector for PCB.
RoHS compliant.
Usage: I/O power device.
| Item | Low loss parameter (single mode) |
|---|---|
| Rated current | 75A |
| Rated voltage | 250V AC; 150VDC |
| Contact resistance | ≤0.45mΩ |
| Withstand voltage | 1500V AC |
| Shock and vibration | 10Hz～500Hz, accelerated speed 98m/s2 |
| Insulation resistance | ≥500MΩ(normal temp); ≥100MΩ(heat and humid) |
| Endurance (cycle) | 200 cycles |
| Working temp(℃) | -55℃～125℃ |
Let-us know the telecom connectors your are looking for
We will come back with a solution